TITAN for Construction

Built for the Toughest
Sites in the UAE.

IP5420,000W PeakZero Emissions

CHALLENGES IN CONSTRUCTION & FIT-OUT

Four Power Constraints Slowing Down UAE Construction

Site teams face the same power problems from civils through to final fit — each one erodes productivity, adds cost and creates safety risk.

No mains supply on early-stage sites — full diesel dependency

Grid connection comes late in the build cycle. Teams run on diesel from day one — fuel procurement, noise and running costs hit the project budget daily.

Generator exhaust in enclosed fit-out is a health and legal risk

CO build-up in sealed interiors, plant rooms and basements without forced ventilation endangers workers and may breach UAE site safety regulations.

Heavy-load tools trip standard generators on motor start

Angle grinders, compressors and drills spike to 5× rated load on startup. Generators can't absorb the inrush — crews lose productive hours every shift.

Urban site noise triggers municipality restrictions

Dubai, Abu Dhabi and Sharjah enforce strict noise limits. Generator complaints and working-hour restrictions halt critical works at the worst times.

HOW TITAN PB2400 SOLVES IT

Engineered for UAE Construction Site Realities

20,000W peak absorbs every motor start surge

Grinders, compressors, drills — the TITAN PB2400 handles inrush current without tripping. Your crew stays productive through every startup cycle.

IP54 survives UAE construction site conditions

Dust, sand, rain, high humidity — laser-welded steel, V-frame chassis, 30-year rust-proof coating. Built to work, shift after shift.

Zero emissions — safe inside enclosed fit-out

No CO risk in sealed interiors, basements, plant rooms or ceiling voids. No forced ventilation required. Site safety fully maintained at all times.

Silent — no noise restrictions, any hour

Dawn through evening operations with zero noise complaints, no municipality curfews, no lost working hours on noise-restricted urban projects.

EQUIPMENT YOU CAN POWER

Every Tool on Your Site, Powered

Heavy Power Tools

Angle grinders (2,200W), circular saws, reciprocating saws, impact wrenches, rotary hammers at full rated load

Air Compressors

Piston and scroll compressors up to 3,600W rated — 20,000W peak absorbs every motor start

Fit-Out Tools

Tile cutters, planers, routers, belt sanders, vacuum extraction, laser levels, heat guns, nailers

Site Lighting

LED work lights, floodlights, tower lighting — essential for basement, tunnel and night-shift operations

Survey & MEP

Total stations, pipe threading, conduit benders, cable pullers, portable welding units, testing equipment

Site Operations

Water pumps, concrete vibrators, dust extraction, CCTV supply, office and welfare cabin power

Load Builder

Pick the tools your crew runs. See what one charge delivers — and how many units your site needs.

Your tools

Arc Welder

3,000W

Core Drill

3,200W

Cutting Saw

2,700W

Water Pump

2,300W

Demolition Hammer

2,200W

Angle Grinder

2,200W

Drill

1,400W

Air Compressor

1,500W · typical rating

Industrial Vacuum

1,200W · typical rating

LED Floodlight

200W · typical rating

Site Fan

150W · typical rating

Laptop / Comms

100W · typical rating

Tool-on time per hour50%

Power tools rarely run continuously. 50% is typical for drilling and cutting; lighting and pumps run near 100%.

Running load

3,600W

0W3,600W rated per unit

1h 13m

Runtime per charge

1×

Units for simultaneous load

Charges per 8-hour shift

Runs on a single PB2400

Brochure-tested per charge

Core Drill: 11 holes Ø150×150mm per charge

Estimate based on 2,304Wh at 97% efficiency. Actual runtime varies with tool and material.

VALUE vs DIESEL

Running Cost

Ask for a project quotation with your exact fleet and hours.

	TITAN PB2400	Diesel generator
Fuel cost / 8-hr shift	AED 0	AED 100–160 (diesel)
Maintenance per month	AED 0 — maintenance-free	AED 200–500
Noise fine (municipality)	None	Up to AED 10,000
Ventilation cost (enclosed)	AED 0 — not required	AED 500–2,000/month

POWER YOUR NEXT PROJECT THE SMART WAY

Fleet pricing available for contractors, MEP firms and fit-out companies.